Which material is more suitable for stainless steel end mills?
Stainless steel milling cutter is a very common tool. Which material is more suitable for stainless steel milling cutter?
1. When processing stainless steel, except end milling cutter, some end milling cutters and cemented carbide as milling cutter materials, other types of milling cutters are made of high-speed steel, especially tungsten molybdenum and high vanadium high-speed steel, with good results.
2. Stainless steel materials are widely used, but because stainless steel has different characteristics from other general materials, processing stainless steel has become a major problem for technicians. The stainless steel has strong adhesion and fusion, and the chips are easy to adhere to the cutting edge of the milling cutter, which worsens the cutting conditions; In the process of upper milling, the cutting edge first slides on the hardened surface, which increases the trend of work hardening; The impact and vibration in the milling process are large, making the milling cutter blade easy to chip and wear.
3. When milling stainless steel, the cutting edge should be sharp, able to withstand impact, and the chip groove should be large. Large spiral angle milling cutter can be used, and corrugated edge end milling cutter can be used to process stainless steel pipe or thin-walled parts. High speed milling with carbide end milling cutter and stainless steel milling with indexable end milling cutter can achieve good results.
When milling stainless steel, the down milling method should be used as far as possible. Asymmetric climbing milling method can ensure smooth cutting between the cutting edge and metal, small chip bonding contact area, and easy to shake off under the action of high-speed centrifugal force, so as to avoid the chip hitting the front face when the cutter tooth re-enters the workpiece. Peeling and chipping phenomenon, improve the durability of the tool.
Contact Us
- Room 103, Building A25, Shuiyingjiazhou, Taiyangshan Road, Qingzhuhu Town, Kaifu District, Changsha, Hunan China
- cutoutil@hanvitools.com
- +8618974971540
Which material is more suitable for stainless steel end mills?
Feb 01, 2023
You Might Also Like
Send Inquiry





