+8618974971540

How to select end milling cutter? The key is to look at these points

Feb 08, 2023

How to select end milling cutter? The key is to look at these points
End milling cutter is a rotating tool with one or more teeth, which is used for milling operation. During operation, each cutter tooth intermittently cuts off the allowance of the workpiece in turn. The milling cutter is mainly used to process the plane, step, groove, forming surface and cutting workpiece on the milling machine.
1. The milling cutter is used on CNC machining center or ordinary milling machine.
2. Material and hardness of end milling cutter.
3. Specification of end milling cutter, such as blade length, total length, blade diameter, shank diameter, etc.
If used on CNC machining centers, solid cemented carbide shall be used. White steel can be used for ordinary milling machines.
The hardness of white steel milling cutter is softer than that of cemented carbide milling cutter. High-speed steel knife is cheap and has good toughness, but its strength is not high, it is easy to cut, and its wear resistance and thermal hardness are relatively poor. When the material is hard, if the coolant is not in place, it is easy to burn the knife, which is one of the reasons for the low thermal hardness.
Carbide milling cutter has good thermal hardness and wear resistance, but poor impact resistance. If you drop the blade casually, the blade will break. Cemented carbide is a material made by powder metallurgy. The hardness can reach about 90HRA, and the heat resistance can reach 900-1000 degrees. Therefore, white steel is suitable for ordinary milling machines, and alloy milling cutters are used for CNC machining centers.
The selection of milling cutter diameter varies with products and production batches. The selection of tool diameter mainly depends on the specification of the equipment and the processing size of the workpiece.
(1) Face milling cutter
When selecting the diameter of the face milling cutter, the power required by the cutter should be within the power range of the machine tool, and the diameter of the machine tool spindle can also be used as the basis for selection. The diameter of the face milling cutter can be selected according to D=1.5d (d is the spindle diameter). In batch production, the tool diameter can also be selected according to 1.6 times the cutting width of the workpiece.
(2) End mill
The selection of the diameter of the end milling cutter should mainly consider the requirements of the machining size of the workpiece to ensure that the power required by the cutter is within the rated power range of the machine tool. If it is a small diameter end mill, the main consideration is whether the higher speed of the machine tool can reach the lower cutting speed of the tool (60m/min).
(3) Slot milling cutter
The diameter and width of slot milling cutter shall be selected according to the size of the workpiece to be processed, and its cutting power shall be within the allowable power range of the machine tool.

Send Inquiry