+8618974971540

What situations are prone to occur in CNC cast iron machining, and what should be paid attention to when using cutting fluid?

Aug 02, 2022

What situations are prone to occur in CNC cast iron machining, and what should be paid attention to when using cutting fluid?

1. As we all know, iron is easy to rust. At the same time, the structure of cast iron is very uneven and contains flake graphite and sand inclusions. Therefore, when machining cast iron, the cutting fluid must have good rust resistance and lubricity to ensure the smoothness of the workpiece. Brightness and corrosiveness to avoid tool and workpiece wear.

2. During the processing of cast iron, metal chips are easily generated during cutting and grinding of iron, which is easy to cause cutting heat. Therefore, the cutting fluid is required to have good cooling performance.

3. When cutting cast iron, a large number of small cuts will be produced, including iron powder and graphite powder. In order to avoid the deterioration of cutting fluid, these chips and iron powder should be washed away in time. Cutting fluid has good cleaning performance.

4. The stability of cast iron cutting fluid should also be considered, no irritating odor, no damage to the operator's skin, and good environmental performance.

Common precautions for using cast iron cutting fluids:

1. When changing the fluid, thoroughly clean the water tank, pipes, etc. that are in contact with the cutting fluid.

2. You can choose to add stock solution and water on time according to the use method and processing technology of the product.

3. The dilution of cutting fluid should use tap water or deionized water with better water quality.

4. Use a refractometer to control the concentration value of cutting fluid, and check the concentration value and pH value of cutting fluid in time.


Send Inquiry