+8618974971540

Tungsten carbide blade manufacturing process

Mar 30, 2021

The main components of cemented carbide blades are tungsten carbide and cobalt in different proportions. The original form of the raw materials is powder; a container weighing about 560kg contains the prepared raw materials, which will be used to produce different powders; in the workshop Here, the dry raw materials are mixed with a solvent made of ethanol and water to form a gray paste with a consistency similar to yogurt; after the paste is dried, the sample is sent to the laboratory for quality testing; these powders are composed of many It is composed of particles with a diameter of 20-200μm, which are very small (the diameter of a hair is 50-60μm).


The stamped cemented carbide blades need to be heated to harden. This work is completed by a sintering furnace, which can process thousands of blades at a time; the pressed blade powder is heated to about 1,500°C in a 13-hour process. It melts and becomes cemented carbide, which is a very hard material; the shrinkage ratio in the sintering process is about 50%, so the blade size after sintering is only half of the previous one.


Send Inquiry