This is what is commonly used now, as well as photoelectric and universal. Eccentric edge finder: first install it on the tool holder, rotate the spindle, make the edge finder slowly approach and touch the edge to be searched, until you see that the rotation of the edge finder is not eccentric, write down the coordinates of the machine tool, and then Enter the machine coordinate system after subtracting or adding the radius of the edge finder.
Photoelectric edge finder: slowly approach and touch the edge you want to find, and when you hear the buzzer, write down the machine coordinate value (the radius should be calculated as above), and input it into the coordinate system.
Universal edge finder: The contact slowly touches the edge you want to find, and you see that the pointer of the meter head rotates to the "0" position (one turn is enough) to record the machine coordinate value (the radius is calculated as above), Enter into the coordinate system.





