Selection principle of cemented carbide NC blade materials:
At present, the widely used NC tool materials mainly include diamond tools, cubic boron nitride tools, ceramic tools, coated tools, cemented carbide tools and high-speed steel tools. There are many general brands of tool materials, and their performance varies greatly. The following table shows the main performance indicators of various tool materials.
Tool materials for NC machining must be selected according to the workpiece and processing properties. The selection of tool materials shall be reasonably matched with the machining objects. The matching of cutting tool materials with the machining objects mainly refers to the matching of their mechanical, physical and chemical properties, so as to obtain Z long tool life and Z large cutting productivity.
1. Mechanical property matching between cutting tool material and machining object
The matching of mechanical properties between cutting tools and machining objects mainly refers to the matching of mechanical properties such as strength, toughness and hardness of tools and workpiece materials. Tool materials with different mechanical properties are suitable for processing different workpiece materials.
① The order of tool material hardness is: diamond tool>cubic boron nitride tool>ceramic tool>cemented carbide>high speed steel.
② The order of bending strength of tool materials is: high speed steel>cemented carbide>ceramic tools>diamond and cubic boron nitride tools.
③ The order of tool material toughness is: high speed steel>cemented carbide>cubic boron nitride, diamond and ceramic tools.
The workpiece material with high hardness must be processed with a tool with higher hardness. The hardness of the tool material must be higher than that of the workpiece material, which is generally required to be above 60HRC. The higher the hardness of the tool material, the better its wear resistance. For example, when the cobalt content in cemented carbide increases, its strength and toughness increase, but its hardness decreases, which is suitable for rough machining; When the cobalt content decreases, its hardness and wear resistance increase, which is suitable for finishing.





