Milling method of carbide milling cutter
The feed direction of the carbide milling cutter relative to the workpiece and the rotation direction of the milling cutter mainly have the following two milling methods:
1. Forward milling. The rotation direction of the milling cutter is the same as the feed direction of the cutting. At the beginning of the cutting, the milling cutter will bite the workpiece and cut the last chip.
2. Back milling. The rotation direction of the milling cutter is opposite to the feed direction of the cutting. The milling cutter must slide a section on the workpiece before starting cutting, starting with the cutting thickness of zero, and reaching the maximum cutting thickness at the end of cutting.
During forward milling, the cutting force presses the workpiece towards the workbench, and during reverse milling, the cutting force makes the workpiece leave the workbench. Because the cutting effect of the forward milling is the best, the forward milling is usually selected. Only when the machine tool has thread clearance problems or there are problems that cannot be solved by the forward milling, the reverse milling can be considered.
Contact Us
- Room 103, Building A25, Shuiyingjiazhou, Taiyangshan Road, Qingzhuhu Town, Kaifu District, Changsha, Hunan China
- cutoutil@hanvitools.com
- +8618974971540
Milling method of carbide milling cutter
Jan 10, 2023
You Might Also Like
Send Inquiry




