+8618974971540

Maintenance of carbide milling cutter

Jan 17, 2023

Maintenance of carbide milling cutter
When the axis line of the carbide milling cutter coincides with the edge line of the workpiece or approaches the edge line of the workpiece, the operator shall do the following equipment maintenance work:
1. Check the power and rigidity of the machine tool to ensure that the required milling cutter diameter can be used on the machine tool.
2. The overhang of the tool on the spindle shall be as short as possible to reduce the impact load caused by the milling cutter axis and workpiece position.
3. Use the correct milling cutter pitch suitable for this process to ensure that there are not too many blades engaging with the workpiece at the same time to cause vibration during cutting. On the other hand, ensure that there are enough blades engaging with the workpiece when milling narrow workpiece or milling cavity.
4. Ensure that the feed rate of each blade is used so that the correct cutting effect can be obtained when the chip is thick enough to reduce the wear of the tool. The indexable blade with positive front angle groove is adopted to obtain stable cutting effect and minimum power.
5. Select the milling cutter diameter suitable for the workpiece width.
6. Select the correct main deflection angle.
7. The position of milling cutter shall be correct.
8. Use cutting fluid only when necessary.

Send Inquiry