Causes of Vibration During Thread Milling
What is the reason for the vibration of the thread milling tool when machining the workpiece for milling? How to solve this phenomenon?
Classification of thread milling tools? Thread milling cutter cutting parameters table
1. The tool clamping is unstable
1. Maximize the clamping force
2. Reduce cutting force by building radial and axial depth of cut
3. Choose a positive insert with a small corner radius and a small parallel face
Second, the workpiece clamping is not firm
1. Choose a shoulder face mill with a positive insert
2. Choose a light cutting geometry with a sharp cutting edge and a large clearance angle (which produces low cutting forces)
3. Minimize axial cutting forces by reducing axial depth of cut, using positive inserts with small nose radius and small parallel faces, and sharp cutting edges
4. Avoid supporting the workpiece in the opposite direction of the cutting force during processing
3. Uneven feed of the worktable
Consider the possibility of feed screw adjustment on the machine, adjust the locking screw or replace the ball screw on a conventional machine, try up milling





