Contact Us
- Room 103, Building A25, Shuiyingjiazhou, Taiyangshan Road, Qingzhuhu Town, Kaifu District, Changsha, Hunan China
- cutoutil@hanvitools.com
- +8618974971540

Two-Flute Straight Shank Micro-Diameter Deep Slot Flat End Mill
Two-Flute Straight Shank Micro-Diameter Deep Slot Flat End Mill
High vibration resistance structure suitable for mold cavity
milling.Large cutting parameters can be used without
reducing speed.High toughness substrate material and high
rigidity structure achieve deep slot milling with ap = d.Next
-generation coating technology meets the needs of dry
cutting and wet cooling under different cooling conditions
for various steels.
Description
Two-Flute Straight Shank Micro-Diameter Deep Slot Flat End Mill

| Item Code | Diameter (D) | Length (L1) | Neck Angle (γ) | Shank Diameter (d h6) | Total Length (L) |
|---|---|---|---|---|---|
| EM-2ES-0010450 | 0.1 | 0.2 | 15° | 4 | 50 |
| EM-2ES-00150450 | 0.15 | 0.3 | 15° | 4 | 50 |
| EM-2ES-0020450 | 0.2 | 0.4 | 15° | 4 | 50 |
| EM-2ES-00250450 | 0.25 | 0.5 | 15° | 4 | 50 |
| EM-2ES-0030450 | 0.3 | 0.6 | 15° | 4 | 50 |
| EM-2ES-00350450 | 0.35 | 0.7 | 15° | 4 | 50 |
| EM-2ES-0040450 | 0.4 | 0.8 | 15° | 4 | 50 |
| EM-2ES-00450450 | 0.45 | 0.9 | 15° | 4 | 50 |
| EM-2ES-0050450 | 0.5 | 1.0 | 15° | 4 | 50 |
| EM-2ES-00550450 | 0.55 | 1.1 | 15° | 4 | 50 |
| EM-2ES-0060450 | 0.6 | 1.2 | 15° | 4 | 50 |
| EM-2ES-00650450 | 0.65 | 1.3 | 15° | 4 | 50 |
| EM-2ES-0070450 | 0.7 | 1.4 | 15° | 4 | 50 |
| EM-2ES-00750450 | 0.75 | 1.5 | 15° | 4 | 50 |
| EM-2ES-0080450 | 0.8 | 1.6 | 15° | 4 | 50 |
| EM-2ES-00850450 | 0.85 | 1.7 | 15° | 4 | 50 |
| EM-2ES-0090450 | 0.9 | 1.8 | 15° | 4 | 50 |

| Item Code | Diameter (D) | Neck Length (L2) | Blade Length (L1) | Shank Diameter (d2) | Neck Angle (γ) | Shank Diameter (d h6) | Total Length (L) |
|---|---|---|---|---|---|---|---|
| EM-2EP-0010030450 | 0.1 | 0.3 | 0.1 | 0.085 | 15° | 4 | 50 |
| EM-2EP-0010050450 | 0.1 | 0.5 | 0.1 | 0.085 | 15° | 4 | 50 |
| EM-2EP-0010080450 | 0.1 | 0.8 | 0.1 | 0.085 | 15° | 4 | 50 |
| EM-2EP-0010100450 | 0.1 | 1.0 | 0.1 | 0.085 | 15° | 4 | 50 |
| EM-2EP-00150050450 | 0.15 | 0.5 | 0.15 | 0.13 | 15° | 4 | 50 |
| EM-2EP-00150100450 | 0.15 | 1.0 | 0.15 | 0.13 | 15° | 4 | 50 |
| EM-2EP-0020100450 | 0.2 | 1.0 | 0.2 | 0.18 | 12° | 4 | 50 |
| EM-2EP-0020150450 | 0.2 | 1.5 | 0.2 | 0.18 | 12° | 4 | 50 |
| EM-2EP-0020200450 | 0.2 | 2.0 | 0.2 | 0.18 | 12° | 4 | 50 |
| EM-2EP-0020300450 | 0.2 | 3.0 | 0.2 | 0.18 | 12° | 4 | 50 |
| EM-2EP-0020400450 | 0.2 | 4.0 | 0.2 | 0.18 | 12° | 4 | 50 |
| EM-2EP-0030100450 | 0.3 | 1.0 | 0.3 | 0.27 | 15° | 4 | 50 |
| EM-2EP-0030150450 | 0.3 | 1.5 | 0.3 | 0.27 | 12° | 4 | 50 |
| EM-2EP-0030200450 | 0.3 | 2.0 | 0.3 | 0.27 | 12° | 4 | 50 |
| EM-2EP-0030300450 | 0.3 | 3.0 | 0.3 | 0.27 | 12° | 4 | 50 |
| EM-2EP-0030400450 | 0.3 | 4.0 | 0.3 | 0.27 | 12° | 4 | 50 |
| EM-2EP-0030500450 | 0.3 | 5.0 | 0.3 | 0.27 | 12° | 4 | 50 |
| EM-2EP-0040150450 | 0.4 | 1.5 | 0.4 | 0.37 | 12° | 4 | 50 |
| EM-2EP-0040200450 | 0.4 | 2.0 | 0.4 | 0.37 | 12° | 4 | 50 |
| EM-2EP-0040300450 | 0.4 | 3.0 | 0.4 | 0.37 | 12° | 4 | 50 |
| EM-2EP-0040400450 | 0.4 | 4.0 | 0.4 | 0.37 | 12° | 4 | 50 |
| EM-2EP-0040500450 | 0.4 | 5.0 | 0.4 | 0.37 | 12° | 4 | 50 |
| EM-2EP-0040600450 | 0.4 | 6.0 | 0.4 | 0.37 | 12° | 4 | 50 |
| EM-2EP-0050200450 | 0.5 | 2.0 | 0.5 | 0.46 | 12° | 4 | 50 |
| EM-2EP-0050300450 | 0.5 | 3.0 | 0.5 | 0.46 | 12° | 4 | 50 |
| EM-2EP-0050400450 | 0.5 | 4.0 | 0.5 | 0.46 | 12° | 4 | 50 |
| EM-2EP-0050500450 | 0.5 | 5.0 | 0.5 | 0.46 | 12° | 4 | 50 |
| EM-2EP-0050600450 | 0.5 | 6.0 | 0.5 | 0.46 | 12° | 4 | 50 |
| EM-2EP-0050800450 | 0.5 | 8.0 | 0.5 | 0.46 | 12° | 4 | 50 |
| EM-2EP-0051000450 | 0.5 | 10.0 | 0.5 | 0.46 | 12° | 4 | 50 |
| EM-2EP-0060200450 | 0.6 | 2.0 | 0.6 | 0.56 | 12° | 4 | 50 |
| EM-2EP-0060300450 | 0.6 | 3.0 | 0.6 | 0.56 | 12° | 4 | 50 |
| EM-2EP-0060400450 | 0.6 | 4.0 | 0.6 | 0.56 | 12° | 4 | 50 |
| EM-2EP-0060500450 | 0.6 | 5.0 | 0.6 | 0.56 | 12° | 4 | 50 |
| Item Code | Diameter (D) | Neck Length (L2) | Blade Length (L1) | Shank Diameter (d2) | Neck Angle (γ) | Shank Diameter (d h6) | Total Length (L) |
|---|---|---|---|---|---|---|---|
| EM-2EP-0060600450 | 0.6 | 6.0 | 0.6 | 0.56 | 12° | 4 | 50 |
| EM-2EP-0060800450 | 0.6 | 8.0 | 0.6 | 0.56 | 12° | 4 | 50 |
| EM-2EP-0061000450 | 0.6 | 10.0 | 0.6 | 0.56 | 12° | 4 | 50 |
| EM-2EP-0070200450 | 0.7 | 2.0 | 0.7 | 0.66 | 12° | 4 | 50 |
| EM-2EP-0070300450 | 0.7 | 3.0 | 0.7 | 0.66 | 12° | 4 | 50 |
| EM-2EP-0070400450 | 0.7 | 4.0 | 0.7 | 0.66 | 12° | 4 | 50 |
| EM-2EP-0070500450 | 0.7 | 5.0 | 0.7 | 0.66 | 12° | 4 | 50 |
| EM-2EP-0070600450 | 0.7 | 6.0 | 0.7 | 0.66 | 12° | 4 | 50 |
| EM-2EP-0070800450 | 0.7 | 8.0 | 0.7 | 0.66 | 12° | 4 | 50 |
| EM-2EP-0071000450 | 0.7 | 10.0 | 0.7 | 0.66 | 12° | 4 | 50 |
| EM-2EP-0080200450 | 0.8 | 2.0 | 0.8 | 0.76 | 12° | 4 | 50 |
| EM-2EP-0080300450 | 0.8 | 3.0 | 0.8 | 0.76 | 12° | 4 | 50 |
| EM-2EP-0080400450 | 0.8 | 4.0 | 0.8 | 0.76 | 12° | 4 | 50 |
| EM-2EP-0080500450 | 0.8 | 5.0 | 0.8 | 0.76 | 12° | 4 | 50 |
| EM-2EP-0080600450 | 0.8 | 6.0 | 0.8 | 0.76 | 12° | 4 | 50 |
| EM-2EP-0080800450 | 0.8 | 8.0 | 0.8 | 0.76 | 12° | 4 | 50 |
| EM-2EP-0081000450 | 0.8 | 10.0 | 0.8 | 0.76 | 12° | 4 | 50 |


China Low Price Ball Nose Cutter Suppliers, Manufacturers, Factory - Made in China - CS CUTOUTIL
Related Products of bull nose cutter:

Hot Tags: two-flute straight shank micro-diameter deep slot flat end mill, China, manufacturers, suppliers, factory, cheap, low price, made in China, ball nose cutter, solid carbide end mill, indexable ball nose end mill, flat end mill cutter, aluminium milling cutters, 1 inch ball end mill
You Might Also Like










