Straight Shank Collet Chuck

Straight Shank Collet Chuck

Specifications of straight-shank-collet-chuck :

1.Put the collet into the nut,turn the collet slightly.Push it into the nut at the offered direction evenly.When the offset flange into the undercut of the collet.
2.Fix the nut and the collet on the clamp body or machine tool spindle,rotating the nut until the collet is in pressing.Wipe the straight shank of cutter,and insert it into the pilot hole.Tighten the nut with a wrench till the cutter is clamped heavily.
(Caution:never tighten the nut without cutter in it for it will break)
3.When the cutter changed,lossen the nut and it shall bring out the collet and the cutter together,then remove the cutter and push out the collet in the offered direction.At last installing the different size collet and cutter.

Related Products of straight-shank-collet-chuck：

Company Introduction:

We are focus on producing cemented carbide burrs ,carbide inserts ,carbide drills and carbide end mills ,ER collets ,cnc er chuck collet over 10years . We also supply cnc toolholder as well as famous brand products like korloy ,mitsubishi ,sumitomo ,seco ,sandvik .

Workshop:

We use ANCA and Walter machines to produce all carbide tools .

Quality Control and Warehouse :

Package and Shipping :

Hot Tags: straight shank collet chuck, China, manufacturers, suppliers, factory, cheap, low price, made in China