+8618974971540

Which material is better for stainless steel end mills?

Sep 29, 2022

Which material is better for stainless steel end mills?


Stainless steel milling cutter is a very common tool, so which material is better for stainless steel milling cutter?

1. When machining stainless steel, in addition to end mills, some end mills and cemented carbide are used as milling cutter materials, and other types of milling cutters are made of high-speed steel, especially tungsten-molybdenum and high-vanadium high-speed steel, with good results.

2. Stainless steel materials are widely used, but because stainless steel has different characteristics from other general materials, processing stainless steel has become a major problem for technicians. The adhesion and fusion force of stainless steel are strong, and the chips are easily attached to the cutting edge of the milling cutter, which makes the cutting conditions worse; when milling, the cutting edge first slides on the hardened surface, which increases the tendency of work hardening; during milling, impact, The vibration is large, which makes the milling cutter blade easy to chip and wear.

3. When milling stainless steel, the cutting edge should be sharp, can withstand impact, and the chip flute should be large. Large helix angle milling cutters can be used, and corrugated edge end mills can be used to process stainless steel pipes or thin-walled parts. Good results can be obtained with high-speed milling with carbide end mills and stainless steel with indexable end mills.

When milling stainless steel, climb milling method should be used as much as possible. The asymmetric climb milling method can ensure that the cutting edge and the metal are smoothly cut off, the chip bonding contact area is small, and it is easy to be thrown off under the action of high-speed centrifugal force, thereby avoiding the impact of the chip on the rake face when the cutter teeth re-cut into the workpiece. Spalling and chipping phenomena increase tool durability.


CS Cutoutil Hardware Tools Co., LTD

Tel: +8618974971540

Skype ID: hwei1988280

Whatsapp: 18974971540

Email: cutoutil@hanvitools.com

Add: Room1108,Building A5, WoHuCheng, No. 368, Wanjiali North Road, Kaifu District Changsha City, Hunan Province, China


Send Inquiry