+8618974971540

What is the difference between non-standard tools and regular tools?

Apr 08, 2023

What is the difference between non-standard tools and regular tools?
During the machining process, it is usually difficult to use standard cutting tools for machining. Therefore, the production of non-standard cutting tools is very important for mechanical processing. Due to the common use of non-standard tools for metal cutting in milling, this article briefly introduces the production of non-standard tools in milling.
Due to the fact that standard cutting tools are manufactured for cutting large amounts of ordinary metal or non-metallic parts, the hardness will increase when the workpiece is subjected to heat treatment or made of stainless steel. The knife is easy to stick and has some workpiece surfaces. When the geometric shape is very complex or the surface to be machined has high roughness requirements, standard tools cannot meet the machining requirements. Therefore, in the machining process, targeted design is required for the material of the cutting tool, the geometric shape of the cutting edge, and the geometric angle, which can be divided into two categories: those that do not require customization and those that require customization. Two issues can be solved without the need for custom tools, such as size issues and surface roughness issues.
If it is a size issue, you can choose a standard tool with a size similar to the desired size. It can be solved by changing the grinding, but there are two points to note:
1) The difference in size should not be too large, usually not exceeding 2mm, as the difference in size can cause changes in the shape of the tool groove, directly affecting the chip space and geometric angle.
2) If it is an end milling cutter with cutting holes, it can be replaced on a regular machine tool with low cost. If it is a keyway tool without cutting holes, it cannot be used on ordinary machine tools and requires special five axis linkage. The cost of grinding on the machine will also be higher.
If it is a surface roughness issue, it can be achieved by changing the geometric angle of the blade. For example, increasing the front and rear angles will significantly improve the surface roughness of the workpiece. However, if the user's machine tool is not rigid enough, the edges may become blunt and the surface roughness may increase. This aspect is very complex and requires analysis of the processing site to draw conclusions.

Send Inquiry