What are the characteristics of cemented carbide tools
Cemented carbide is a powder metallurgical product made by sintering high-hardness, refractory metal compound powder (such as WC, TiC, TaC, NbC and other high-temperature carbides) and metal binder (Co, Mo, Ni, etc.). Because the cemented carbide components contain a large number of carbides with high melting point, high hardness and good chemical stability, the hardness, wear resistance and heat resistance of cemented carbide are high. The normal temperature hardness of cemented carbide is generally 89~93HRA, which is equivalent to 78~82HRC, and the allowable cutting temperature is as high as 800℃~1000℃. Even at 540℃, its hardness remains at 77~85HRA, which is equivalent to the normal temperature hardness of high-speed steel. .
Therefore, the cutting performance of cemented carbide is much higher than that of high-speed steel. Under the same durability, the allowable cutting speed of cemented carbide is 4 to 10 times higher than that of high-speed steel. The cutting speed can reach more than 100m/min, and it can be cut. All kinds of difficult-to-machine materials that cannot be cut by high-speed steel tools, such as hardened steel. However, due to its low bending strength (about 1/2~1/4 of high speed steel), impact toughness (about (1/8~1/30) of high speed steel) and poor workmanship, the current cemented carbide The material is mainly used in the production of non-interrupted cutting tools with simple blade shape and no impact. When the carbide content in the cemented carbide is high, the hardness is high, but the bending strength is relatively low; when the binder When the content is higher, the bending strength is higher and the hardness is lower. ISO divides cemented carbide into three categories: P, K and M. The main components of these three categories of cemented carbide are WC, so they are collectively called WC-based cemented carbide.
Class K is equivalent to my country's tungsten-cobalt cemented carbide, code-named YG, mainly composed of WC and Co.




