Thread inserts are getting more and more recognition
With the development of CNC machine tools in China, thread inserts are more and more recognized by people. They have good processing performance and become powerful tools to reduce the cost of thread processing, improve efficiency and solve the problem of thread processing. At present, the thread milling cutter is made of cemented carbide, and the processing line speed can reach 80~200M/MIN, while the processing line speed of high-speed steel wire taper is only 10~30M/MIN, so the thread milling cutter is suitable for high-speed cutting, and the surface finish of processing thread is also greatly improved.
The thread processing of high hardness materials and superalloy materials, such as titanium alloy and nickel base alloy, has always been a difficult problem, mainly because the tool life is short when high-speed steel wire taper is used to process the threads of the above materials, and the processing of hard material threads with carbide thread milling cutter is an ideal solution. Machinable hardness is HRC58~62. For the thread machining of superalloy materials, the thread milling cutter also shows excellent machining performance and longer life than expected.
For threaded holes with the same thread pitch and different diameters, it requires more than one tool to process with a tap. However, if a thread milling cutter is used for processing, only one tool can be used. After the tap is worn and the thread size is smaller than the tolerance, it cannot be used any more and can only be scrapped; When the thread milling cutter is worn and the size of the threaded hole is less than the tolerance, the NC system can be used to make necessary tool radius compensation adjustment, and then the qualified thread can be processed. Similarly, in order to obtain high-precision threaded holes, it is much easier to adjust the tool radius with a thread milling cutter than to produce high-precision taps.
For the small diameter thread processing, especially the thread processing of high hardness materials and high temperature materials, the tap will sometimes break, block the threaded hole, or even make the parts scrapped; The thread milling cutter is adopted. Because the cutter diameter is smaller than the processed hole, the threaded hole will not be blocked even if it is broken, and it is very easy to take out, which will not lead to scrapping of parts; When thread milling is adopted, the cutting force of the tool is greatly reduced compared with that of the tap. This is particularly important for machining large diameter threads. It solves the problem that the machine load is too large to drive the tap for normal processing.
As a tool for machining thread with CNC machine tools, thread insert has become a widely used practical tool type.
There are many kinds of NC milling cutter. With the increasing development of the NC industry, the type, application conditions and occasions of NC milling cutter will also change. We still need to continue to pay attention to and study its dynamics, which is of great practical significance.
Contact Us
- Room 103, Building A25, Shuiyingjiazhou, Taiyangshan Road, Qingzhuhu Town, Kaifu District, Changsha, Hunan China
- cutoutil@hanvitools.com
- +8618974971540
Thread inserts are getting more and more recognition
Dec 22, 2022
You Might Also Like
Send Inquiry





