+8618974971540

The role of the shear blade solder is to firmly weld the blade to the handle

Sep 29, 2021

The role of the shear blade solder is to firmly weld the blade to the handle


Shears blades have become an indispensable part of people's lives. Shear blades are related to people's quality of life and promote finances. So, what exactly is a shear blade?

The role of the solder is to firmly weld the blade to the handle. Specifically, the solder is heated to a molten state. At this time, the surface of the metal and the metal to be soldered continuously infiltrate the metal molecules, the iron is dissolved in the liquid copper in the solder, and the copper diffuses to the iron along the grain boundaries of the iron. Internally, this can cause the solder to penetrate into the metal to be soldered. The deeper the penetration, the better the welding quality and the higher the bond strength. If the solder melts and cannot be wetted by the solder, spots will appear on the solder surface and a good solder joint cannot be obtained. Therefore, it is necessary to select the appropriate solder, put forward some requirements on the solder, and keep the soldering metal surface flat. And it's clean.

Soldering requirements:

(1) The melting point of the solder should not be too high, lower than the melting point of the knife handle of 40-600C, otherwise it is easy to melt the knife shaft and cause the blade to break. However, it should not be too low. If it is too low, it will affect the welding strength, and the cutter head will be heated and peeled off during the cutting process.

(2) The solder should have good fluidity and wettability to ensure high-strength V, t joints.

(3) The solder should have sufficient toughness, and the welded seam can withstand intermittent cutting force and impact load.

(4) The weld formed by solder has the best plasticity, and the plastic deformation of the weld during the welding process can eliminate part of the welding stress to reduce the occurrence of cracks.

(5) The solder should not contain easily swallowed elements. Otherwise, the components will evaporate when heated at high temperatures, which will affect the welding strength and affect the health of the operators.

(6) Low solder cost.


Send Inquiry