+8618974971540

The key to high temperature resistance treatment of hard alloy blades lies in coating technology

Feb 11, 2020

Today, high-speed cutting technology has been widely used in various manufacturing industries. However, because the alloy blades are prone to high temperatures during high-speed rotating cutting, this is very disadvantageous for the blades. Not only is it easy to damage the alloy blades, but also reduces the service life of the blades, which seriously affects the healthy development of the enterprise. So how to solve the high temperature resistance of alloy blades?

In order to solve the high temperature resistance of alloy blades, first let us understand the coating technology of the blades. The coating acts like a thermal barrier because it has a much lower thermal conductivity coefficient than the alloy blade base and workpiece material. Therefore, these alloy inserts absorb less heat and can withstand higher cutting temperatures.

Whether it is turning or milling, coated alloy inserts allow the use of more efficient cutting parameters without reducing alloy insert life. It plays an important role in the performance of alloy blades. Thinner coatings can withstand temperature changes better than thicker coatings during impact cutting.

In the past few years, in addition to coating technology improvements, we have also adopted a relatively more basic method to improve coating performance. One of the reasons is that the alloy blade is polished in a more basic way. Polishing can improve the smoothness, residual stress state and reduce cutting friction.

The coating thickness of alloy blades is between 2 and 18m, which plays an important role in blade performance. Thinner coatings can withstand temperature changes better than thicker coatings during impact cutting. This is because thinner coatings have less stress and are less prone to cracks.

During rapid cooling and heating, the thick coating is like a glass that is heated and cooled extremely quickly, and is easily broken. Dry cutting with thin-coated blades can extend the life of alloy blades by up to 40%, which is why physical coatings are often used to coat round plastic blades and milling blades.

Send Inquiry