Carbide Rotary File

Carbide Rotary File

Descriptions of carbide rotary file :

carbide rotary file can be used on many materials: metals including steel, aluminum and cast iron, all types of wood, acrylics, fibreglass and plastics. When used on soft metals such as gold, platinum and silver, carbide burrs are ideal as they will last a long time with no chipping or breaking.

• Steel, Carbon Steel & Stainless Steel

• Cast Iron

• Aluminium

• Titanium

• Cobalt

• Nickel

• Gold, Platinum & Silver

• Ceramics

• Fibreglass

• Plastic, Carbon Fiber Reinforced Plastic (CRP), Glass Fibre Reinforced Plastic (GRP)

• Brass, Copper & Bronze

• Zinc

• Wood

carbide rotary file has metric size and inch size and we mostly exported to USA market .

How to use the carbide rotary file ?

1.Speed /RPM The speed at which you use your carbide bur in your rotary tool will depend on the material you're using it on and the contour being produced but it's safe to say you do not need to exceed speeds of 35,000 RPM. The table below shows some approximate speeds. Diameter of Burr RPM 1.6mm or 1/16" 25,000 - 35,000 2.35mm or 3/32" 17,000 - 26,000 3mm or 1/8" 17,000 - 26,000 6mm or 1/4" 11,000 - 16,500 12mm or 1/2" 8,000 - 12,000 16mm or 5/8" 7,650 - 11,500

2.Apply only a little pressure As with all drill bits and burrs, let the burr do the work and apply only a little pressure otherwise the cutting edges of the flutes will chip away or become smooth too quickly, reducing the life of your burr.

3. Keep The Carbide Burr On The Move When using your carbide burr try not to keep it still for too long as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.

4.carbide rotary file has metric size and inch size and we mostly exported to USA market .

FAQ

Q: Can I visit you? A: Sure,

Q: How can I get the sample to check your quality? A: After price confirmation, you can require for samples to check our product's quality. If you just need a blank sample to check the design and quality. We will provide you samples for free as long as you afford the express freight.

Q: What can I get the price? A: We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price, please tell us in your email so that we will regard your inquiry priority.

Q: What is your term of delivery? A: We accept EXW, FOB Shanghai or FOB Shenzhen. You can choose the one which is the most convenient or cost-effective for you.

Hot Tags: carbide rotary file, China, manufacturers, suppliers, factory, cheap, low price, made in China, double cut burr, rotary burr set, rotary burr cutter, carbide burr drill bit, carbide burrs for steel, double cut burr home depot